 
 
|
In addition to ACT's Multi-purpose cloth, there is also a mitt available. The mitt makes it easier to clean narrow and hard-to-reach places, such as hand rails.
|
|
|
- Lay the clean cloth flat.
- Fold the cloth in half.
- Fold it in half again, forming a square. You now have a total of eight usable cleaning surfaces.
- Place your hand on the cloth and wipe evenly. The cloth should be flat against the surface being cleaned.
- When the side you are using is dirty, turn the cloth to a clean side.
- Use ACT Multi-purpose cloths dry for dusting.
To use the Multi-purpose cloth damp, wet the cloth with clean water.
Wring out the cloth to remove as much water as possible.
The cloth will make tile shiny and clean.
Great for stainless steel surfaces!
It easily removes grease and grime.
By just adding water, the cloth removes grease and dirt. For example, try it on your oven doors and the top of your stove.
|
- You can clean all smooth (non-porous) surfaces.
- Use your ACT Multi-purpose cloth dry for dusting or damp for removing spots or cleaning greasy surfaces.
- Use different colors for different areas within your home.
- When removing stubborn, dried spots spray water directly on the spot and rub while applying pressure.
- Never use chemicals with ACT cloths.
Note! If you have extremely sensitive skin, we recommend that your wear latex gloves when using the cloths. They can remove natural oils from your skin.
|
|
CARE
To preserve the environment and minimize the use of detergents, we recommend that you rinse your ACT Multi-purpose cloth in warm water. You can then use it again. Heavily soiled cloths should be washed on the hottest washing machine cycle or boiled in water for three to five minutes on the stove. In both cases, use a mild, low sudsing detergent. ACT Multi-purpose cloths should never be laundered with fabrics containing lint, such as terry cloth. NEVER USE FABRIC SOFTENERS OR ANY KIND OF BLEACH! For best results, air dry your ACT Multi-purpose cloths.
|
|
- Cleaning System Overview -
|
|
|